Hp envy 5055 troubleshooting

123 HP Envy 5055 unable to be installed over network

  • Disconnect the USB cable from your printer, if any.
  • Control Panel switch and all printers are uninstalled.
  • Go to devices and hp envy 5055 configure printer and delete all enlisted printers.
  • To view the printer list present, go to the system manager and type in secret entries. Disable it. Uninstall it.
  • Run the ‘printui.exe /s’ command and enter the file. Delete print application property driver entries.
  • After cleaning, restart the system and open the run window, tap into ‘services.msc’ and click OK. Now, do new device installation.

HP ENVY 5055 will not connect with PC

  • Connect to your wireless PC. To access HP web services Remove USB or Ethernet cables from your 5055 hp envy wireless setup printer, you will need Good Internet Speed. Go to the wireless configuration wizard 123.hp.com/setup 5055 and pick your network.
  • If the password or WEP or WPA key is needed, enter and press.
  • To go back to Home Screen , click Ok in the overview tab.
  • Install HP envy 5055 HP website setup engine. Or sync it with the CD version.
  • Pick your model number from the menu and press Begin and then download if you can not find the driver. Follow the printer contact screen instructions.
  • Choose and install HP Quick search. Add scanner. Add scanner. And now you can connect your hp envy 5055 printer to your Computer.

HP Envy 5055 printer not accepting password

  • First of all, keep your passwords in mind is case sensitive. So, type your password properly.
  • Notice if changes in hardware / software can trigger some problems.
  • Now restore original printer settings by following the steps below.
  • Press Restore network settings and proceed as directed. Click wireless and then print control panel settings.
  • Reboot your 5055 Setup Printer hp envy. Go to the Wireless Setup Wizard and pick the SSID network.
  • Enter password on the same SSID network and the password and link should be approved.

HP Envy 5055 stuck during set up

  • Please ensure that no changes in hardware / software occur, as some issues can arise.
  • Now, restore the original printer settings via the steps below.
  • Tap on wireless and then print control panel settings.
  • Click Restore network configuration and proceed as directed. Boot your printer and machine again.
  • Go to the Setup Wizard for Wireless and choose your SSID network.
  • Enter the password for the same SSID network and the password and link should be approved. Upon link, drivers and applications are created from the HP website.
  • Take the steps for the drivers to be mounted again. This is how to successfully implement 123 HP envy 5055 wireless system.

How to connect hp envy 5055 to laptop

  • Firstly, deactivate Wi-Fi directly if the procedure is on, as it will cause an error.
  • Click the wireless button on the Printers Control Panel Home Screen.
  • Go to hp envy 5055 Wireless system now. Switch off and the show will return to the Direct Wireless Menu.
  • If you can’t still use 123.hp.com/setup 5055 printers to connect your laptop, follow the steps below.
  • Click wireless and then print control panel settings. Press Restore network settings and proceed as directed.
  • Verify whether or not network settings have been restored and print out the network settings tab.
  • Before that, try to link the laptop to the printer through a wireless network and make sure that they all are linked to the same network.

About the author

JVNPSolutions

Leave a Comment