HP Deskjet 3632 Printer Installation Setup

HP Deskjet 3632 printer offers multifunction like printing, copying, scanning, and web connection. The printing can be completed utilizing mobile connectivity with ePrint the print demand for android mobiles. The AirPrint application helps the wireless printing function from the iOS devices like iPad, iMac, and iPhone.

Open HP Deskjet 3632 Printer

  1. First, take the box to check the HP printer 123.hp.com/dj3632, turn the box on its side, and slide out the printer. Then remove the Styrofoam covers each one at a time and smoothly place the package on an even outside.
  2. Set aside all the papers and reports that come along with the printer in the HP Deskjet 3632 printer carton. Then there is an installation CD in the package for both windows and mac software and driver installation. The related can be downloaded from 123.hp.com/setup3632.
  3. The HP instant tank card for the printer also comes with the printer box, there is an instant ink policy that is with HP. Then, on contributing to this policy, the ink method is automatically forwarded to the HP service and request a new ink cartridge.
  4. There is a start here conducted in the printer box which includes written steps for setting up the printer. Finally, there is a Get started guide that gives basic troubleshooting and additional characteristics of the HP Deskjet printer.

Setting Up HP Deskjet 3632 Printer

  1. Initially, remove the plastic cover that holds around the exterior of the 123hp com setup 3632 printers.
  2. Then, open the front door and remove the cardboard inside. Next, remove the strip on the front and rear of your 123hp com setup 3632 printers.
  3. Open the front cover and next open the ink cartridge access opening to remove any cardboard and close the ink cartridge access and the front door.
  4. Verify 123.hp.com/dj3632 for HP Deskjet printer-related issues. Then there is a box that includes a tri-color cartridge, power cord, black color cartridge, and USB cable.
  5. Loosen the power cord and plug in the card onto the rear of your printer and the other end to the wall socket. Lastly, power ON the button and are presently finished with setting up the HP Deskjet 3632 printer.

123.hp.com/dj3632 Installing - HP Deskjet 3632 Ink Cartridges

  1. Start with opening the front cover to open the ink cartridge access door. Presently, wait for some time till the HP Deskjet 3632 ink cartridges come to the HP Deskjet ink access area.
  2. Presently open the black cartridge cover and take out the HP Deskjet 3632 ink cartridge. Pick out the orange protecting film. Having known not to touch the copper site may break the ink flow and the print head.
  3. Carefully place the black ink cartridge in the black slot at a higher angle till it clicks into its position. Then, repeat all the methods with a tri-color cartridge and close the ink cartridge access door and the first cover.


  1. If your printer shows a cartridge missing error in your printer, first open the ink cartridge access door and clean the cartridges without touching the ink outlet and the print head.
  2. Then, try to clean the electrical communications inside the cartridges if the error message controls. First power OFF your printer and remove the cartridges and clean inside the cartridges smoothly with a soft cloth.
  3. Finally, replace the cartridges if the above techniques fail to correct the error message.


  1. Apply purified water to clean the ink cartridge. The HP ink is water-soluble, so working small hot purified water can soften the ink on the print head and rehydrate the cartridge to regularly print again.
  2. The rubbing alcohol-soaked by the swab can also be utilized to clean the ink cartridges. Other techniques use centrifuges or high cleaners.

123.hp.com/dj3632 install - Paper Loading

  1. After installing HP Deskjet 3632 ink cartridges, in the control panel, you will be helped to load paper in the input plate. You can utilize A1 or letter size fresh white paper.
  2. Presently open the input plate, take a heap of plain white paper and arrange them evenly before inserting them in the input plate. Push in the paper till the paper stops.
  3. Next, modify the paper width models until they rest on the edges of the paper and slide in the input plate.
  4. Then, in the control panel touch yes and then complete after filling paper. Presently installed software and wanted drivers from 123.hp.com/dj3632.
  5. After filling and pressing done in the control panel, the arrangement page will be printed which will be used by the printer for processed printing results.


We are an established third-party technical support team of 123.hp.com/setup for hp printer scan support, we are not at all associated with any other party or company directly. We sincerely respect other companies’ brand names, and logos as well as products. We assure you that these are used at our interface only for reference purposes, these do not relate to any category directly. We are an independent company and we maintain the work and support as a third party only.