HP Envy 120 Printer Setup - 123.hp.com/envy 120

The HP Envy 120 Printer Setup is an easily affordable printer that delivers printouts of high quality. After purchasing the printer, you have to set it up. Carry out the procedures in the forthcoming topics to set the hardware and software of your printer. You can also find troubleshooting methods on this page to fix the printer problems if any. Even our technicians solve the issue that occurs in your HP Envy 120 printer.

HP Envy 120 Printer Installation Setup

  1. After purchasing the printer, assure the printer box is sealed properly
  2. Unseal the printer box and assure the printer components are given in it.
  3. Remove the protective tapes and packing materials from the printer.
  4. Plug the power cable to the respective port of the printer and power supply.
  5. Power on the printer by force pressing its power switch.
  6. Configure the settings on the control panel of the printer.
  1. Open the scanner lid and cartridge access door at the top of the printer
  2. Take the new ink cartridges and unpack them.
  3. Remove the protective tapes on the cartridges.
  4. Open the cartridge latch in the printer
  5. Insert the cartridges in the respective slots.
  6. Close the cartridge latch, access door, and scanner top.
  7. Print an alignment sheet and arrange the cartridges.
  8. Install the printer driver on your computer and entirely install the HP Envy 120 Printer Setup.

HP Envy 120 Driver & Manual Download

Avail the HP Envy 120 printer driver on your PC from the Driver Download switch given on this page. Find and tap on the switch and start the download method. After downloading the driver, find it in the destination folder on your PC or laptop. You can take the latest version of the printer driver from this website for free.

HP Envy 120 Driver Installation

  1. Install the printer driver on your PC after downloading it.
  2. Double-tap on the driver file in the destination folder on your PC to install it.
  3. If the downloaded chauffeur file is in the .zip format, unzip it.
  4. Follow the instructions on your computer’s screen.
  5. Set the connection process between your printer and computer-based on the specifications of the devices
  6. For more instructions to install the driver, contact our technical support team.

HP Envy 120 Airprint Setup

  1. Power up your printer if it is switched off earlier.
  2. Press the Wireless icon on the control panel of the printer.
  3. Pick the Wireless Direct option and connect your printer to the network of your router
  4. On your Apple device, tap the Settings icon.
  5. Choose the network name of your router and finish the AirPrint setup.
  6. For Mac devices, tap the Apple icon at the top of the computer’s display.
  7. Tap System Preferences –> Print & Scan.
  8. Switch on the AirPrint characteristic and finish the HP Envy 120 Printer Setup.

HP Envy 120 Wireless Direct Setup

  1. Switch on your router and check if it has an active internet connection.
  2. Power up your printer if it is switched off previously.
  3. Assure the ink cartridges are installed properly and, input tray is loaded with suitable papers.
  4. Tap the Start menu on your PC.
  5. Choose Settings –> Devices –> Printers & Scanners.
  6. Choose to Add a Printer or Scanner –> Show Wi-Fi Direct printers.
  7. Pick the name of your printer which begins with the word Direct.
  8. Presently tap the Add Device option near the printer name.
  9. Provide the WPS PIN when prompted and finish the Wireless Direct setup.

How to Connect HP Envy 120 to Wifi

  1. Switch on your router and ensure it has an active internet connection.
  2. On the function panel of your HP Envy 120 printer, choose the Settings icon.
  3. Choose the HP Envy 120 Wireless Setup option.
  4. Enter the network name and password.
  5. Download the printer driver on your PC if you have not installed it yet. Follow the guidelines on the screen.
  6. Select the connection method as wireless
  7. Enter the network name and password of the same router.
  8. Presently the devices are connected.
  9. For more instructions on how to connect the HP Envy 120 printer to Wifi, contact our customer support team.

What Ink Cartridge does the HP Envy 120 Use?

  1. Always use genuine ink cartridges to get rid of printing problems.
  2. You can purchase genuine cartridges from the manufacturer’s store
  3. The HP 60 Black and HP 60 Tri-color cartridges are proper for printers that are bought in the Americas or Asia-Pacific regions, except the countries like India, China, and Japan.
  4. The HP 300 Black and HP 300 Tri-color cartridges are congenial with printers that are bought in Western Europe.
  5. Printers that are bought in the Middle East, Africa, Japan, or CIS regions fit the HP 121 Black & HP 121 Tri-color printer models.
  6. If you have bought the printer in China or India, utilize the HP 818 Black and Tri-color cartridges.

HP Envy 120 Double-Sided Printing

Printing on both sides of the paper with HP Envy 120 is just a variation of changing the settings. If your printer supports ADF, then it is more than a quick job. Let us see how to print utilizing the duplex printing option manually with the HP Envy 120 Printer Setup steps below.

  1. Keep a required load of papers in the input plate to avoid page mismatch problems.
  2. Access the printing app through which you wish to print and tap File under the Menu.
  3. Tap the Print option under File. Now, select your printer and then click Printer Properties or Preferences which may change based on your OS version.
  4. When the Document Properties window opens, verify if a Printing shortcuts tab is available.
  5. If so, choose Print on Both sides, Two-sided, or Duplex printing.
  1. If the shortcut is not available, then tap the Layout, Characteristics, or Finishing tab whichever displays.
  2. Find out the Print on Both sides menu and then select binding or page flip.
  3. Tap OK and then Print. Now, remove the printed pages and align them.
  4. For printing the other side of the page, insert the printed first sides of the pages into the printer’s input plate.
  5. Tap Continue to get the printed sides of other pages.

HP Envy 120 Scan to Computer

  1. Verify whether you have installed the appropriate driver on your computer that contains the scanning software.
  2. If you do not have it, download it from this page and install it on your Windows device.
  3. While installing, allow the tick mark before HP Scan.
  4. Open the lid of the scanner glass and place the picture or document for scanning
  5. Close the scanner lid and access the Scan button on your printer’s control panel.
  6. Press the Scan button or option depending on what your printer contains and navigate to the Scan menu
  7. Select your computer name, the scan job type and wait for the scan process to finish.
  8. Presently, look for a folder containing the scanned item displaying automatically on your computer. Tap the file with the name Scan to view the scanned item.

HP Envy 120 Fax Setup

The HP Envy 120 printer does not help the faxing option, but you can print, scan, and copy with the same. If you have questions related to your printer, get in touch with our technical consultant for assistance.

How to Reset HP Envy 120 Printer?

  1. The HP Envy 120 printer requires a reset when it malfunctions during usage. Follow these simple steps to reset and make it work normally
  2. Do not Switch off your printer while doing this method.
  3. Disconnect the printer’s link from the power outlet and its rear port.
  4. Do not operate the printer for some time so that it takes its own time to complete the cooling period.
  5. After a minute, plug the power cable back into the power outlet and the printer’s rear port.
  6. If the printer did not turn on its own, turn it on using the power switch.
  7. If the printer has encountered any problem previously, it should have been sorted out after this reset process.

HP Envy 120 Printer Problems

A printer can throw several problems as a part of depreciation. In such cases, the HP Envy 120 printer may not be special. There are a few normal problems faced by the users of HP Envy 120 which are given below so that if you come across one like that, the HP Envy 120 Printer Setup solutions given for such issues must help.

HP Envy 120 AirPrint Not Working

AirPrint not working problem on your Envy 120 printer arises when you try to connect the printer to AirPrint, and it displays that No AirPrint Printers Found. You can simply resolve the problem with the steps provided below.

  1. Sometimes, if there is a variation in the signal frequency or the printer cannot reach the required network signal, you may not be able to attach it to AirPrint.
  2. To overcome this, try to keep the network device close to your HP Envy 120 printer. Assure that the frequency of the router is set to 2.4GHz.
  3. Verify whether your printer and the device you use for printing are on the same network and reboot all devices such as a router, printer, and PC.
  4. If you have installed the full characteristic driver, then verify whether there are any updates for the HP Envy 120 printer released by the manufacturer.
  5. If so, update the new firmware of the printer
  1. Verify if there is a firmware update for your Apple device that is not letting you attach to the AirPrint-enabled printer. If so, update it to modest.
  2. Make sure if the AirPrint feature is allowed. Print a network test page to view the IP id of the printer so that you can access the EWS page
  3. Type the printer’s IP address on an internet browser and hit Enter so that the EWS page opens. Tap Settings->Security->Administrator Settings.
  4. Under Network settings, check if AirPrint has already been chosen. If not, select it and tap Apply. Reboot the printer and verify if you can set up AirPrint.

HP Envy 120 Display Not Working

If there is a problem with the power supply that goes to the printer. Sometimes, the display becomes black, and the printing machine becomes unresponsive. To resolve the issue, perform a hard reset on the printer.

How to Perform a Hard Reset?

  1. Assure that the printer is not attached using a surge protector but to the direct wall outlet.
  2. Before you start with the process, remove all the ink cartridges installed in the printer
  3. Unplug all the power connections of the printer while it is switched on. If you have connected it using a USB cable, remove that as well.
  4. After a few minutes, touch the printer’s Power switch at least for 30 seconds to turn it on manually.
  5. Presently, take the power cord, connect it to the printer’s rear port and the wall outlet with its appropriate ends.
  6. Switch on your printing device and allow it to complete the warm-up period.
  7. Insert the removed ink cartridges and print a test page to verify if the problem is resolved.
  8. If this did not help, verify if you are due to update the printer’s firmware and if so, do it

HP Envy 120 Cartridge Problem

This error can also be due to the usage of conflicting ink cartridges or missing ink cartridges. Perform these basic steps and see if the issue is resolved.

  1. Get the existing ink cartridges out, check if there is damage, and reinsert them properly into their place.
  2. Clear the dust on the electrical contacts if any.
  3. Once again, remove the ink cartridges and reseat them again properly
  4. Clean the electrical contacts of the cartridges again.
  5. Shut down the printer and power on again.
  6. If you locate a fault with a cartridge, try to replace it with a new one.
  7. Also, verify if there is a change in the print settings related to black and tri-color cartridges.

HP Envy 120 Copy Problems

 The common issues with HP Envy 120 copy may display fuzzy colored lines, horizontal or vertical streaks in the output received.

  1. Verify whether the scanner light is up and the scanner bar moves the moment you open the lid.
  2. Remove all the sources of connections given to the printer be it from the wall outlet or its rear port. But ensure that you do not turn it off while removing the power cord.
  3. After removing, wait for at least 3 minutes and bring back the connections to the printer
  4. Switch on the printer manually and let it become idle. Now, check whether the issue is sorted out.
  5. You can try cleaning the cartridge contacts. If this is to deal with the vertical streaks, then there must be an HP Envy 120 Printer Setup problem with the hardware.
  6. For this, it is suggested to clean the rollers and the scanner glass as well


We are an established third-party technical support team of 123.hp.com/setup for hp printer scan support, we are not at all associated with any other party or company directly. We sincerely respect other company’s brand names, and logos as well as products. We assure you that these are used at our interface only for reference purposes, these do not relate to any category directly. We are totally independent company and we maintain the work and support as a third party only.